Raw Mill Introduction:
Raw mill is mainly used in grinding raw materials and end products in cement plant. It is also suitable for various ores and other materials metallurgy, mine, chemical and construction. Besides, it has two forms of milling, one is an open form, and the other is a recycle close form equipped with powder concentrator. It is widely applied in many industries and has convenient operation.
It has many advantages such as, strong adaptability, continuous production, large crushing ratio, easy to adjust the size of the products. And it is suitable for both dry production and wet production, also can allow the milling and drying processing simultaneously.
Structure features:
1. The end cover and discharging system are streamlined to cut down wind resistance, enlarge the effective volume and make easy to discharge materials, increase the production.
2. Single silo structure, and adopt different structure of liner plate in different section, ensure the high efficiency.
3. Negative pressure; efficiently prevent the phenomenon of powder leaking.
4. Heat preservation measures ensure the drying ability reach 6%-8%.
5. Reserved DCS interface; meet the demand of concentrated control.
Spec.(m) |
Rotary |
Feed |
Capacity |
Load of |
Main motor |
Main reducer |
Weight (exclude motor and reducer)(t) | |||
Model |
Power |
Speed |
Model |
Speed | ||||||
Φ2.2×7 |
21.4 |
≤25 |
20~25 |
31 |
YR148-8 |
380 |
740 |
ZD70-9 |
5 |
41 |
Φ2.2×13 |
21.6 |
≤25 |
33-37 |
58-60 |
YR630-8/1180 |
630 |
740 |
MBY630 |
5.6 |
95 |
Φ2.4×8 |
20.91 |
≤25 |
25-28 |
39-42 |
JR1512-8 |
570 |
740 |
ZD80-9 |
5 |
76.4 |
Φ2.4×10 |
20 |
≤25 |
38-40 |
50 |
YR710-8/1180 |
710 |
740 |
JDX630 |
5.6 |
92.4 |
Φ2.6×10 |
20.6 |
≤25 |
40-42 |
62-65 |
YR800-8/1180-8 |
800 |
740 |
JDX710 |
6.3 |
133 |
Φ3×9 |
19.13 |
≤25 |
50-55 |
76-80 |
YR1000-8/1180 |
1000 |
740 |
JDX800 |
6.3 |
137 |
Φ3.2×9 |
18.3 |
≤25 |
60-70 |
90 |
YR1250-8/1430 |
1250 |
740 |
JDX900 |
7.1 |
157 |
Φ3.5×10 |
17.3 |
≤25 |
75-80 |
87 |
YR1250-8/430 |
1600 |
740 |
JDSX1000 |
6.3 |
210 |
Φ3.8×7.5 |
16.7 |
≤20 |
85 |
85 |
YR710-8 |
1600 |
740 |
JDX900 |
5.6 |
218 |
Φ4.6×10 |
15.1 |
≤25 |
195 |
190 |
YRK1000-8 |
3350 |
740 |
JS150-B |
|
315 |